SSRN Author: Shuhui LiShuhui Li SSRN Content
https://www.ssrn.com/author=2842077
https://www.ssrn.com/rss/en-usThu, 18 Jul 2019 01:06:00 GMTeditor@ssrn.com (Editor)Thu, 18 Jul 2019 01:06:00 GMTwebmaster@ssrn.com (WebMaster)SSRN RSS Generator 1.0REVISION: Something About the Balancing of Thermal MotorsInternal combustion engines in line (regardless of whether the work in four-stroke engines and two-stroke engines Otto cycle engines, diesel and Lenoir) are, in general, the most used. Their problem of balancing is extremely important for their operation is correct. There are two possible types of balancing: Static and dynamic balance. The total static to make sure that the sum of the forces of inertia of a mechanism to be zero. There is also a static balance partial. Dynamic balance means to cancel all the moments (load) inertia of the mechanism. A way of the design of an engine in a straight line is that the difference between the crank 180 [°] or 120 [°]. A different type of construction of the engine is the engine with the cylinders in the opposite line, called "cylinder sportsmen". In this type of engine (regardless of their position, which is most often vertical) for engines with two cylinders, one has a static balance total and an imbalance in the dynamic. Similar to the model ...
https://www.ssrn.com/abstract=3074082
https://www.ssrn.com/1807587.htmlWed, 17 Jul 2019 06:46:17 GMTREVISION: Something About Electron DimensionIn this study will be exposed the theoretical principles necessary for the determination of the exact size of an electron in motion, depending on its speed of travel. Equations, aimed to accurately determines the radius R of the electron in motion, relating the electron moving speed v and its rest mass m0 are discussed. Mechanical moment of inertia of a sphere around of one of its diameters shall be determined by the relationship relating the total kinetic energy of one electron in motion, as a sum of the two components (translational and rotational). Using the theory of Louis de Broglie, which shows the conservation of the pulse, the wavelength (particle associated) has been calculated. Wave frequency (associated with the electron in motion) has been determined and moving electron kinetic energy has been estimated by subtracting the total electron rest energy from total electron energy in movement.
https://www.ssrn.com/abstract=3075396
https://www.ssrn.com/1803548.htmlTue, 02 Jul 2019 09:16:44 GMTNew: Kinematics and Forces to a New Model Forging ManipulatorForging manipulators have become more prevalent in the industry of today. They are used to manipulate objects to be forged. The most common forging manipulators move on a railway to have a better precision and stability. Heavy payload forging manipulators systems are normally characterized by a large load output and a large capacitive load input as well. The relationship between outputs and inputs will greatly influence the control and the reliability. The great advantages are the decreasing energy consumption (during furnace operation) and the avoidance of damage to the furnace door, furnace lining, or the electrodes. Furthermore, an operator does not need to be in the hazardous area near the furnace. The compact design of these systems charging, stoking and distributing machines, along with a special lever system, allows these machines to be used in the most limited areas. The robust system machine presented in combination with the powerful drives system guarantees all the needed ...
https://www.ssrn.com/abstract=3074347
https://www.ssrn.com/1803539.htmlTue, 02 Jul 2019 09:02:23 GMTNew: Kinematics and Forces to a New Model Forging ManipulatorForging manipulators have become more prevalent in the industry of today. They are used to manipulate objects to be forged. The most common forging manipulators move on a railway to have a better precision and stability. Heavy payload forging manipulators systems are normally characterized by a large load output and a large capacitive load input as well. The relationship between outputs and inputs will greatly influence the control and the reliability. The great advantages are the decreasing energy consumption (during furnace operation) and the avoidance of damage to the furnace door, furnace lining, or the electrodes. Furthermore, an operator does not need to be in the hazardous area near the furnace. The compact design of these systems charging, stoking and distributing machines, along with a special lever system, allows these machines to be used in the most limited areas. The robust system machine presented in combination with the powerful drives system guarantees all the needed ...
https://www.ssrn.com/abstract=3074347
https://www.ssrn.com/1803521.htmlTue, 02 Jul 2019 08:32:26 GMTREVISION: Electron DimensionsIn this study, the theoretical principles necessary to determine the exact magnitude of a moving electron, depending on the speed of movement, will be exposed. The equations are specifically discussed to determine the radius R of the moving electron, which refers to the electron movement velocity v and the resting mass m<sub>0</sub>. The mechanical moment of inertia of a sphere around one of its diameters is determined by the relationship between the total kinetic energy of a moving electron as the sum of the two components (translatable and rotating). Using the theory of Louis de Broglie, which shows impulse preservation, the wavelength (associated with the particle) was calculated. The wave frequency (associated with the moving electron) was determined and the moving electron kinetic energy was estimated by decreasing the total resting energy of the electron from the total energy of the moving electrons.
https://www.ssrn.com/abstract=3074107
https://www.ssrn.com/1803483.htmlTue, 02 Jul 2019 07:31:50 GMTUpdate: Something About Electron DimensionIn this study will be exposed the theoretical principles necessary for the determination of the exact size of an electron in motion, depending on its speed of travel. Equations, aimed to accurately determines the radius R of the electron in motion, relating the electron moving speed v and its rest mass m0 are discussed. Mechanical moment of inertia of a sphere around of one of its diameters shall be determined by the relationship relating the total kinetic energy of one electron in motion, as a sum of the two components (translational and rotational). Using the theory of Louis de Broglie, which shows the conservation of the pulse, the wavelength (particle associated) has been calculated. Wave frequency (associated with the electron in motion) has been determined and moving electron kinetic energy has been estimated by subtracting the total electron rest energy from total electron energy in movement.<br/><i>The Paper was removed</i>
https://www.ssrn.com/abstract=3075396
https://www.ssrn.com/1795962.htmlMon, 10 Jun 2019 19:41:26 GMTUpdate: Something About the Balancing of Thermal MotorsInternal combustion engines in line (regardless of whether the work in four-stroke engines and two-stroke engines Otto cycle engines, diesel and Lenoir) are, in general, the most used. Their problem of balancing is extremely important for their operation is correct. There are two possible types of balancing: Static and dynamic balance. The total static to make sure that the sum of the forces of inertia of a mechanism to be zero. There is also a static balance partial. Dynamic balance means to cancel all the moments (load) inertia of the mechanism. A way of the design of an engine in a straight line is that the difference between the crank 180 [°] or 120 [°]. A different type of construction of the engine is the engine with the cylinders in the opposite line, called "cylinder sportsmen". In this type of engine (regardless of their position, which is most often vertical) for engines with two cylinders, one has a static balance total and an imbalance in the dynamic. Similar to the model ...<br/><i>The Paper was removed</i>
https://www.ssrn.com/abstract=3074082
https://www.ssrn.com/1795957.htmlMon, 10 Jun 2019 19:36:19 GMTUpdate: Kinematics and Forces to a New Model Forging ManipulatorForging manipulators have become more prevalent in the industry of today. They are used to manipulate objects to be forged. The most common forging manipulators move on a railway to have a better precision and stability. Heavy payload forging manipulators systems are normally characterized by a large load output and a large capacitive load input as well. The relationship between outputs and inputs will greatly influence the control and the reliability. The great advantages are the decreasing energy consumption (during furnace operation) and the avoidance of damage to the furnace door, furnace lining, or the electrodes. Furthermore, an operator does not need to be in the hazardous area near the furnace. The compact design of these systems charging, stoking and distributing machines, along with a special lever system, allows these machines to be used in the most limited areas. The robust system machine presented in combination with the powerful drives system guarantees all the needed ...<br/><i>The Paper was removed</i>
https://www.ssrn.com/abstract=3074347
https://www.ssrn.com/1795956.htmlMon, 10 Jun 2019 19:35:13 GMTUpdate: Electron DimensionsIn this study, the theoretical principles necessary to determine the exact magnitude of a moving electron, depending on the speed of movement, will be exposed. The equations are specifically discussed to determine the radius R of the moving electron, which refers to the electron movement velocity v and the resting mass m<sub>0</sub>. The mechanical moment of inertia of a sphere around one of its diameters is determined by the relationship between the total kinetic energy of a moving electron as the sum of the two components (translatable and rotating). Using the theory of Louis de Broglie, which shows impulse preservation, the wavelength (associated with the particle) was calculated. The wave frequency (associated with the moving electron) was determined and the moving electron kinetic energy was estimated by decreasing the total resting energy of the electron from the total energy of the moving electrons.<br/><i>The Paper was removed</i>
https://www.ssrn.com/abstract=3074107
https://www.ssrn.com/1795954.htmlMon, 10 Jun 2019 19:32:47 GMT